Fixed Air Compressor Permanent Magnet Frequency Conversion System 15kw 0.8MPa Electric Screw Air Compressor

• Customization: Available
• After-sales Service: 12 Months After Bl
• Warranty: 12 Months After Bl
• Model NO.: ZLS-30Di
• Cooling System: Air Cooling
• Power Source: AC Power
• Cylinder Position: Horizontal
• Structure Type: Closed Type
• Installation Type: Movable Type
• Type: Twin-Screw Compressor
• Name: 37kw 50HP 7bar 8bar 10bar 12bar Large Capacity Var
• Voltage: 220V / 380V / 415V / 440V 3p
• Exported Country: Germany, SA, USA, Russia, UK, Indian and So on
• Power: 7.5 Kw~55kw
• Other Type: Rotary Screw Air Compressor Screw Air Compressor a
• Transport Package: Suitble for International Transport
• Specification: 1750*1200*1450
• Trademark: Jaguar
• Origin: China
• HS Code: 84144000
• Production Capacity: 30sets/Month

Product Description

Fixed air compressor permanent magnet frequency conversion system 15kw 0.8MPa electric screw air compressor

 

Product Description

 

When you only need a pressure of 0.3~0.5MPa, if you use a conventional 0.7MPa machine to achieve this by means of pressure reduction and other means, the performance and electricity cost of the machine will be virtually wasted. With a permanent magnet low pressure large displacement screw machine, you can achieve more reliable performance and more amazing power saving effect than conventional machines under the same gas consumption. If you purchase a 0.7MPa machine, but the actual operating pressure is 0.3MPa, its working process is usually as follows: the screw host first compresses the air from 0.1MPa to 0.7MPa, and then reduces the pressure to 0.3MPa for use through pressure reducing valves and other means. In short, you need to use a pressure of 0.3MPa, but you are actually suffering from a power consumption of 0.7MPa, which is an invisible waste of energy!

Unique design of low pressure and large displacement

The permanent magnet oil cooling body drive technology created by Jaguar Fachuang is adopted, which is 8% more efficient than the conventional motor drive mode, and the protection level is up to IP65; The cooling fan adopts frequency conversion control, which can save 3% energy consumption while reducing noise; Permanent magnet IPM motor adopts 8 extremely high speed motors, and the energy saving efficiency is 10% higher than that of asynchronous motor.

The design scheme of large rotor, large bearing and low speed is used to ensure more stable performance; Low pressure special accessories are used for inlet valve, oil-gas separation core and minimum pressure valve to significantly improve the overall performance.

Low speed permanent magnet variable frequency screw head

Third generation asymmetric screw rotor profile and heavy load bearing selection with independent patents; Low speed and low wear greatly improve reliability;
The professional high efficiency screw head creates super large exhaust volume and ultra-low use cost. Ultra low speed, as low as 1500 RPM.

 

Product Parameters

 

Model	Mpa	Exhaust volume/exhaust pressure	Power	Noise	Exhaust port pipe diameter	Weight	Size
		m³/min	kw/HP	dB(A)	inch	KG	(*W*Hmm)
ZLS-30Di	0.2	2.88-7.2	22/30	64±2	1-1/2''	500	1400*1000*1400
	0.25	2.7-6.9
	0.3	2.6-6.6
	0.35	2.4-6
	0.4	2.28-5.7				480	1250*900*1300
	0.45	2.21-5
	0.5	2.0-4.7
ZLS-40Di	0.2	3.7-11.3	30/40	65±2	1-1/2''	650	1550*1130*1370
	0.25	3.48-10.1
	0.3	3.2-7.8
	0.35	3.1-7.6
	0.4	2.9-6.9				620	1400*920*1350
	0.45	2.72-6.7
	0.5	2.6-6.5
ZLS-50Di	0.2	5.6-14	37/50	65±2	2''	1000	1750*1300*1600
	0.25	4.88-12.2
	0.3	4.27-11.8
	0.35	4.4-11
	0.4	4.04-10.1			1-1/2''	780	1600*1100*1450
	0.45	3.72-9.3
	0.5	3.52-8.8
ZLS-60Di	0.2	6.44-16.1	45/60	66±2	2''	1360	1750*1300*1600
	0.25	6.08-15.2
	0.3	5.8-14.5
	0.35	5.4-13.5
	0.4	4.6-11.5				980	1700*1110*1480
	0.45	4.32-10.8
	0.5	4.08-10.2
ZLS-75Di	0.2	8.4-21	55/75	66±3	DN80	1580	2300*1700*2050
	0.25	8.08-19.3
	0.3	7.44-18.2
	0.35	6.88-16
	0.4	6.32-15.8			2''	1600	1750*1200*1450
	0.45	5.96-14.9
	0.5	5.68-14.2
ZLS-100Di	0.2	11.2-28	75/100	67±2	DN80	2140	2800*1800*2150
	0.25	9.96-25.3
	0.3	9.32-23.3
	0.35	8.84-22.1
	0.4	8.4-21			DN65	1820	2400*1750*1900
	0.45	7.76-19.4
	0.5	7.44-18.6
ZLS-125Di	0.2	13.84-36.5	90/125	68±2	DN150	3190	3250*2000*2050
	0.25	12.88-34.8
	0.3	11.6-29
	0.35	11.04-27.6
	0.4	10.2-25.5			DN80	2210	2900*1900*2050
	0.45	9.6-24
	0.5	9.12-22.8
ZLS-150Di	0.2	18-45	110/150	70±2	DN150	4900	3600*2000*2250
	0.25	15.52-38.8
	0.3	14.72-36.8
	0.35	13.92-34.8
	0.4	12.4-31			DN80	3090	3000*2000*2050
	0.45	10.8-27
	0.5	10.2-25.5
ZLS-175Di	0.2	19.2-51.8	132/175	70±2	DN200	6100	3600*2000*2250
	0.25	18-45
	0.3	16.88-42.2
	0.35	16.08-40.2
	0.4	15.28-36.86			DN100	4850	3200*2000*2100
	0.45	14-32
	0.5	13.52-31.44
ZLS-200Di	0.2	24-60	160/200	70±2	DN200	7400	3600*2000*2250
	0.25	22.4-56
	0.3	19.6-50.5
	0.35	19.36-48.4
	0.4	18.4-43.86			DN100	6050	3500*2400*2200
	0.45	17.2-42
	0.5	16.04-39.983
ZLS-250Di	0.2	28-70	185/250	72±2	DN200	7700	4000*2300*2250
	0.25	26-67.6
	0.3	23.6-62.9
	0.35	22.8-59
	0.4	20-50			DN125	7000	3600*2000*2250
	0.45	19.2-48
	0.5	18.4-46
ZLS-275Di	0.2	30.8-77	200/275	74±2	DN200	7400	4000*2300*2250
	0.25	29-72.5
	0.3	27.04-67.6
	0.35	25.16-62.9
	0.4	22.64-56.6				7200	3600*2000*2250
	0.45	20.8-52
	0.5	19.6-49
ZLS-300Di	0.2	32.8-82	220/300	76±2	DN200	8400	4000*2300*2250
	0.25	30.8-77
	0.3	28.92-72.3
	0.35	27-67.5
	0.4	25.12-62.8			DN150	7400	4000*2300*2250
	0.45	22.4-56
	0.5	21.2-53
ZLS-350Di	0.2	34.4-86	250/350	78±2	DN200	8600	4500*2800*-2400
	0.25	32.4-81
	0.3	30.6-76.5
	0.35	28.8-72
	0.4	27.6-69			DN200	7600
	0.45	24.4-61
	0.5	23.6-59
ZLS-375Di	0.2	36.8-110.2	280/375	78±2	DN200	9000	4500*2800*2400
	0.25	34.8-102.5
	0.3	32.8-95.5
	0.35	30.8-85.5
	0.4	28.6-79.5			DN200	7800
	0.45	26.8-67
	0.5	25.6-64

Configurattion diagram

Manufacturing technique
1.High Precision CBN Grinding Machine
2.Imported DMG MORI CNC Horizontal machining Center
3.Imported German Zeiss CMM Measuring Center
4.Imported Italian Salvagnini Dynamic Laser Cutting Machine
High Precision Equipment for manufacturing High Precision Screw Rotors EAMI uses professional high-precision manufacturing equipment, to ensure high standard design requirements, The screw screw rotor is grinded with high precision, and the machining precision reaches 0.005mm. The surface roughness reaches Ra0.1-0.2um.

Application

 

Certifications

 

 

Packaging & Shipping

 

 

FAQ